• SMOK Guardian-III e-Pipe Kit

The SMOK Guardian 3 kit is an extremely unique temperature control mod. The Guardian 3 Pipe Kit is a pipe style electronic cigarette that has a unique form factor. SMOK has been known for their breakthrough and extremely popular units. The SMOK Guardian 3 Starter Kit includes one pipe mod and one TFV4 Micro Plus tank. The combination of these two mods will have you vaping like a sir in no time.

The Guardian Pipe III rings in at 101.8*59.1*46.3mm and the Micro TFV4 Plus comes in at 24.5*51mm. This sleek and stylish combo of the G3 Pipe and the Micro TFV4 Plus will offer you one of the best vaping experiences possible. The Guardian 3 Pipe by SMOK is a 75 watt device (1-75 watts) that is also loaded temperature control settings. The temperature control range on this device is 200-600 degrees Fahrenheit. This pipe mod supports Stainless steel, Ni200, and Titanium wire while operating in temperature control.

This device was crafted with fireproof material, polycarbonate, and ABS Alloy to ensure its durability. This mod isn’t just your standard variable wattage/temperature control mod, it’s loaded with a bunch of bonus features.

OLED Display:

The screen is one of the best features on the SMOK Pipe Mod. The large OLED screen is located on top of the mod, where the tobacco bowl would sit on a traditional pipe. One great feature with the OLED screen on this mod is the customizable aspect. If you wish to have the time displayed on your mod, you can choose that selection. If you prefer to have your current settings displayed, you also have that option. Prefer to have just the basic setting displayed? There’s an option for you! What about an active puff duration counter? You’re in luck, you can do that, too! The images below display the different options that you have in regards to your OLED settings

Replaceable 18650 Battery

The pipe mod III from SMOK uses one 18650 battery (not included). One of the benefits of a replaceable 18650 battery is the fact that you can easily swap out the battery once the power starts decline, rather than having to sit and charge your internal battery device. The magnetic battery cover is located on the underside of the mod and it is attached by four powerful magnets. If you do not have an external battery charger, you can also charge this device with the included 510 battery charger.

Firmware Upgradable

Electronic cigarettes are getting more advanced every single day, so having the ability to update your device via firmware updates is a fantastic feature that all electronic cigarette companies should start implementing. The Guardian III firmware port is located discretely under the removable 18650 battery cover.

Micro TFV4 Plus

The tank included with Guardian 3 Pipe Kit is the Micro TFV4 Plus. The Micro TFV4 Plus is a 24.5mm 3.5ml/5ml version of the original TFV4. This starter kit comes with a conversion kit that will allow you to make your Micro Plus either a 3.5ml (standard) tank or a 5ml tank.

Bluetooth 4.0 Connectivity

The Guardian III Pipe mod has Bluetooth functionality built into it. The Bluetooth 4.0 module that is built into this mod will allow you to control all of the features directly from your smartphone. This feature can be extremely useful when you want to switch between operating modes without going through the menu system on the mod. You can also easily increase/decrease wattage settings with your smartphone. Curious about how often you vape? This mod has an active puff counter that will let you know your daily vaping stats.

Specifications of SMOK Guardian III 75W TC Mod:

  • Constructed of Fireproof Material, Polycarbonate, ABS Alloy
  • Wattage: 1-75W
  • Voltage: 0.7-9V
  • VW Resistance: 0.1 - 3.0 ohms
  • TC Resistance: 0.06 - 2.0 ohms
  • Temperature: 200-600F
  • Bluetooth 4.0 Technology / Smart BEC App
  • Supports Kanthal, Nickel, Titanium, Stainless Steel
  • Largest OLED Display Screen on ePipe Mod
  • Spring-loaded 510 Connector
  • Magnetic Battery Cover
  • Powered by (1) 18650 Battery (Sold Separately)
  • Micro USB Charging Port
  • Firmware Upgradeable
  • Puff Counter
  • Time Display
  • Short Circuit Protection Overheat Protection Low Battery Warning

Specifications of Micro Plus Sub Ohm Tank:

  • Constructed of Stainless Steel
  • Pyrex Glass Tank
  • 2.5/3.5 mL Capacity
  • Adjustable Airflow
  • Adjustable Airflow Widebore Drip Tip
  • Top Fill System
  • Interchangeable Coil Heads
  • Double Layered Drip Tip
  • 510 Threaded Atomizer Connection
  • 22mm Diameter

Kit includes:

  • Guardian 3 Pipe Mod
  • Micro TFV4 Plus
  • 0.3ohm Micro Fused Clapton Dual Core Coil
  • 0.25ohm Micro Stainless Steel Dual Core Coil
  • Replacement XL Glass Tube
  • Tank Extension Adapter
  • SMOK Vape Band
  • eGo-USB Charger
  • Micro USB Cable For Firmware Updates
  • User Manual
  • Spare Parts

Video Review:

Write a review

Note: HTML is not translated!
    Bad           Good

SMOK Guardian-III e-Pipe Kit

  • Brand: Smok
  • Product Code: SMK-GRDN3-PIPE
  • Availability: In Stock
  • 420.00₪


Related Products

Charger - Xtar VC2

Charger - Xtar VC2

The XTAR VC2 charger is the World's first lithium-ion battery charger that features an innovative ta..

95.00₪

Joyetech CUBIS Pro Atomizer

Joyetech CUBIS Pro Atomizer

Joyetech is proud to introduce the Joye Cubis Pro Sub-Ohm tank which is upgraded version of the popu..

95.00₪

Genuine LG HG2 18650 3000mAh 20A  - 35 Amp Peak battery

Genuine LG HG2 18650 3000mAh 20A - 35 Amp Peak battery

The all new LG 18650HG2 20A 3000 mAh Batteries are the perfect batteries to use in VV/VW Mods, pairi..

45.00₪

Tags: SMOK Guardian-III e-Pipe Kit, e-Pipe

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.